Installation

This manual is designed as a guide to the installation of the Pocket Hardmount washer-extractor equipped with the AC inverter drive.

NOTE: All information, illustrations, and specifications contained in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

Delivery Inspection

Upon delivery, visually inspect crate protective cover, and unit for any visible shipping damage. If the crate, protective cover, or unit is damaged or signs of possible damage are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the carrier of the condition as soon as it is discovered.

Remove the crate and protective cover as soon after delivery as possible. If any damage is discovered upon removal of the crate and/or protective cover, advise the carrier and file a written claim immediately.

Nameplate Location

The nameplate is located at the rear of the machine and near supply valves. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

2

1

Customer Service

If literature or replacement parts are required, contact the source from whom the washer-extractor was purchased or contact Alliance Laundry Systems LLC at (920) 748-3950 for the name of the nearest authorized parts distributor.

For technical assistance, call:

(920)748-3121 Ripon, Wisconsin

A record of each washer-extractor is on file with the manufacturer. The serial number decal is located on the left side of the control module at the rear of the machine. Figure 1 shows an example of the serial number on the nameplate. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance.

1

2

3

4

5

6

 

P

U

S

H

PHM615N

1Near Supply Valves

2Top of Module

Figure 1

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232228