Patch 86222-27 For Rapier Switches 3
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
Features in 86222-26Patch file details are listed in Table2:
Patch 86222-26 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
The correct protocol number is now returned by VLAN Relay.
Telnet access from a public interface to another public interface was not
denied. This issue has been resolved.
When deleting a list associated with a policy, all rules were being deleted.
Now only the rules associated with the policy and list are deleted.
FTP data transfers did not succeed for some types of NAT. Also, the
presence of flow control TCP flags meant that some TCP control packets
were not recognised. These issues have been resolved.
When using a policy routing rule, the firewall did not translate the source
IP address of a broadcast packet correctly. This issue has been resolved.
Previously, the ADD SWITCH L3FILTER MATCH command was accepted
if the TYPE parameter was not specified. This command now requires the
TYPE parameter, and an error message will be returned if the TYPE
parameter is not specified.
It is now possib le to prevent spec ified ports from a cting as IGMP all -group
ports, and specify which ports are allowed to behave as all-group entry
ports. This is enabled with the ENABLE IP IGMP ALLGROUP command,
and disabled with the DISABLE IP IGMP ALLGROUP command.
For details, see “IGMP Snooping All-Group Entry” on page 42.
Table 2: Patch file details for Patch 86222-26.
Base Software Release File 86s-222.rez
Patch Release Date 30-May-2003
Compressed Patch File Name 86222-26.paz
Compressed Patch File Size 1028794 bytes
PCR: 02498 Module: VLAN Network affecting: No
PCR: 03172 Module: FIREWALL Level: 3
PCR: 03241 Module: FIREWALL Level: 2
PCR: 03412 Module: FIREWALL Level: 3
PCR: 03415 Module: FIREWALL Level: 2
PCR: 03416 Module: SWI Level: 3
PCR: 03420 Module: IPG, SWI Level: 3