Patch 86222-27 For Rapier Switches 25
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
The TickTimer ran one percent slower than it should have. This issue has
been resolved.
Static ARPs can now be added to tagged vlans.
When an IP flow table contained the IP flow structure for a spoofed packet,
the SHOW IP FLOW command would crash when executed. This issue has
been resolved.
Features in 86222-14Patch file details are listed in Table13.
Patch 86222-14 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
When telnetting to the switch, the TCP connection was reset, and when the
packet was passed to IPG_Forward a fatal error occurred. This patch
implements a workaround.
The CREATE CONFIG command now correctly configures tagged ports
belonging to VLANs not in the default STP.
A new command allows the Layer 3 aging timer to be changed:
SET SWITCH L3AGEINGTIMER=<seconds>
where seconds can be 30 - 43200. After each cycle of the ageing timer, all
existing Layer 3 entries with the hit bit set will have the hit bit reset to zero,
and all existing Layer 3 entries with the hit bit set to zero will be deleted.
The SHOW SWITCH command output now displays the Layer 3 ageing
timer value.
Resolution of PCR 02011 in Patch 12 sometimes caused a fatal error. This
issue has been resolved.
PCR: 02070 Module: CORE Network affecting: No
PCR: 02079 Module: IPG Network affecting: No
PCR: 02094 Module: IPG Network affecting: No
Table 13: Patch file details for Patch 86222-14.
Base Software Release File 86s-222.rez
Patch Release Date 28-Feb-2002
Compressed Patch File Name 86222-14.paz
Compressed Patch File Size 335336 bytes
PCR: 02005 Module: IPG Network affecting: No
PCR: 02035 Module: VLAN Network affecting: No
PCR: 02036 Module: SWITCH Network affecting: No
PCR: 02038 Module: PING Network affecting: No