Allied Telesis AT-2716POE Electrical Safety and Emissions Standards

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide

Electrical Safety and Emissions Standards

Declaration of Conformity

Manufacturer Name: Allied Telesis, Inc.

Declares that the product: Fast Ethernet Adapters

Model Numbers: AT-2716POE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

of FCC Rules. These limits are designed to provide reasonable protection against harmful inter f erence in a residential

installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio or television reception. Ho wever, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device must not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users

must follow the specific operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IEEE802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.

Industry

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

This Allied Telesis RoHS-compliant product conforms to the European Union Restriction of the Use of Certai n

Hazardous Substances (RoHS) in Electrical and Electronic Equipment. Allied Telesis ensures RoHS conformance b y

requiring supplier Declarations of Conformity, monitoring incoming materials, and maintaining manufact uring proces s

controls.