AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide

 

3.

Set the "Flow Control" parameter to Auto, Disabled, Rx Enabled,

 

 

Rx & Tx Enabled, or Tx Enabled.

 

The default setting is Auto.

Updating the Interrupt

The “Interrupt Moderation” property will cause the network device to

Moderation property

send interrupt requests only after multiple packets have been received

 

and not immediately upon receipt of a packet.

 

1.

In Microsoft Windows, right-click the Network Adapter in

 

 

Network Connections and then click Properties.

 

2.

Click the Configure button and then the Advanced tab.

 

3.

Set the "Interrupt Moderation" parameter to Disable or Enable.

 

The default setting is Enable.

Updating the IPv4

The “IPv4 Checksum offload” property allows the checksum to be

Checksum Offload

computed by the Gigabit Ethernet Adapter.

property

1.

In Microsoft Windows, right-click the Network Adapter in

 

 

 

Network Connections and then click Properties.

 

2.

Click the Configure button and then the Advanced tab.

 

3.

Set the IPv4 Checksum Offload parameter to Disable, RX & TX

 

 

Enabled, RX Enabled, or TX Enabled.

 

The default setting is RX & TX Enabled

Updating the Jumbo

The "Jumbo MTU" property allows the adapter to transmit and receive

MTU property

oversized Ethernet frames that are greater than 1514 bytes but less

 

than 9000 bytes in length. Note that this parameter requires a switch

 

that is able to process large frames.

 

1.

In Microsoft Windows, right-click the Network Adapter in

 

 

Network Connections, and then click Properties.

 

2.

Click the Configure button and then the Advanced tab.

 

3.

Jumbo MTU is set at 1500 bytes by default. To increase the size

 

 

of the received frames, increase the byte quantity in 500-byte

 

 

increments up to 9000 bytes.

 

The default setting is 1500.

Updating the Large

The “Large Send Offload (IPv4)” property allows the TCP segmentation

Send Offload (IPv4)

to be done by the Gigabit Ethernet Adapter.

 

1.

In Microsoft Windows, right-click the Network Adapter in

 

 

Network Connections and then click Properties.

 

2.

Click the Configure button and then the Advanced tab.

 

3.

Set the "Large Send Offload (IPv4)" parameter to Disable or

Enable.

The default setting is Enable.

71

Page 71
Image 71
Allied Telesis AT-2716POE manual Set the Flow Control parameter to Auto, Disabled, Rx Enabled

AT-2716POE specifications

The Allied Telesis AT-2716POE is a versatile, high-performance Layer 2 managed switch designed to meet the needs of modern networking environments. It is particularly suitable for small to medium-sized businesses looking to implement Power over Ethernet (PoE) technology, allowing for seamless integration of various devices such as IP cameras, VoIP phones, and wireless access points.

One of the standout features of the AT-2716POE is its ability to deliver up to 15.4 watts of power per port on all 16 Ethernet ports. This ensures that powered devices can receive both data and power through a single cable, simplifying installation and reducing the need for additional power outlets. This feature is especially beneficial in environments where power sources are limited or difficult to access.

The AT-2716POE is equipped with advanced networking technologies that enhance performance and ease of management. It supports VLAN (Virtual Local Area Network) functionality, allowing network administrators to segment traffic for improved security and performance. With support for up to 256 VLANs, the switch is ideal for creating separate networks for different departments or functions, thus optimizing overall network efficiency.

In terms of management capabilities, the AT-2716POE offers a web-based interface, SNMP (Simple Network Management Protocol), and command-line interface (CLI) for comprehensive management options. This flexibility enables IT professionals to monitor network performance, configure settings, and troubleshoot issues easily. Features such as port mirroring and network monitoring help ensure that performance is optimized and any anomalies can be quickly addressed.

Additionally, the switch incorporates robust security features, including access control lists (ACLs), which help prevent unauthorized access to the network. The AT-2716POE also supports features like Link Aggregation, which enables the bundling of multiple ports for increased bandwidth and redundancy.

The AT-2716POE is designed with energy efficiency in mind. It complies with IEEE 802.3az Energy Efficient Ethernet standards, allowing it to intelligently manage power consumption based on traffic levels. This not only helps reduce operational costs but also aligns with the growing emphasis on sustainable technology practices.

Overall, the Allied Telesis AT-2716POE is a reliable and feature-rich switch that provides the necessary tools for effective network management and optimization, making it an excellent choice for organizations looking to modernize their infrastructure while ensuring scalability and efficiency.