Allied Telesis AT-2716POE - page 42

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
42
Installing the AT-
2716POE Driver
The procedure in this section describes how to install the driver software
for the AT-2716POE adapter.
1. Open the Device Manger. Refer to “Opening the Device Manager” on
page 40 for more information.
2. Open the Network Adapters folder by clicking on the “+” symbol next
to the Network adapters folder.
The selection expands to show the list of installed adapter cards on
your PC. Two AT-2716POE adapters are listed either by its Allied
Telesis AT-2716POE name or as “Broadcom NetExtreme”.
3. Right click on the first Allied Telesis AT-2716POE or Broadcom
NetExtreme adapter that is listed under Network Adapters.
See Figure 18 for an example of the Device Manger window with
Ethernet Controller selected.
Figure 18. Device Manager Window: Ethernet Controller
4. Select Update Driver Software.
The Update Driver Software - Ethernet Controller Window is
displayed. See Figure 19.
Figure 19. Update Driver Software - Ethernet Controller Window