Allied Telesis AT-MC101XL, AT-MC102XL Electrical Safety and Installation Requirements, Appendix A

Appendix A

Electrical Safety and Installation

Requirements

STANDARDS: This product meets the following standards

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

	STANDARDS: This product meets the following standards
!1	RFI Emission	EN55022 Class A
!2
	WARNING: In a domestic environment this product may cause radio interference in which case the user may be
	required to take adequate measures.
!3	Immunity	EN50082-1 1997

!4 WARNING: This product requires shielded cables to comply with emission and immunity standards. If it is used with unshielded cables, the user may be required to take measures to correct the interference problem at their own expense.

Electrical Safety	TUV-EN60950, UL1950, CSA 950
Laser	EN60825
Warning Class 1 Laser product.

!5 Warning Do not stare into the Laser beam.

At time of installation, the Fiber Optic Lasers comply with FDA Radiation Performance Standard 21CFR Subchapter J, applicable at date of manufacture.

Use of controls or adjustments of performance or procedures other than those specified herein may result in hazardous radiation exposure.

SAFETY

!6 LIGHTNING DANGER

DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING ACTIVITY.

!7 DO NOT BLOCK AIR VENTS

Power to the hub must be sourced only from the adapter.

USA/CANADA

Use a UL Listed/CSA Certified AC adapter of DC 12V, 500mA.

EUROPE - EU

Use TÜV licensed AC adapter of DC 12V, 500mA.

UK

Use a UK Safety Approved AC adapter of DC 12V, minimum 500mA.

13