Chapter 2: Installation
36
Selecting a Site When selecting a site for your AT-PC232/POE Media Converter, observe
the following guidelines:
❒Select a site that is dust-free and moisture-free.
❒The site should allow for easy access to the fiber optic and twisted pair
cables and to the power cord.
❒If the media converter will be installed on a table, the table should be
level and secure.
❒Do not place objects on top of the media converter.
❒Air flow around the unit and through its vents should be unrestricted.
❒The power outlet for the device should be located near the unit and be
easy to access.
❒Use a dedicated power circuit or power conditioner to supply reliable
power to the unit.
Reviewing theSafety GuidelinesPlease review the following safety guidelines before you begin to install
the AT-PC232/POE Media Converter.
Note
The indicates that a translation of the safety statement is
available in a PDF document titled “Translated Safety Statements”
(613-000990) posted on the Allied Telesis website at
www.alliedtelesis.com. This document is also included with the
documentation CD that is shipped with the product.
Warning: Class 1 Laser product.
L1
Warning: Do not stare into the laser beam.
L2
Warning: Class 1 LED product.
L3
Warning: The fiber optic ports contain a Class 1 laser device.
When the ports are disconnected, always cover them with the
provided plug. Exposed ports may cause skin or eye damage
L4