Allied Telesis PN 613, AT-S63 manual Stacking Features supported in Version 3.1.0 Patch

AT-S63 Version 3.1.0 Patch 1 Software Release Notes

Stacking Features supported in Version 3.1.0 Patch 1

The following features are supported across a stack

ˆPort statistics

ˆPort configurations

ˆRemote Telnet management

ˆEvent log

ˆSpanning tree protocol (STP)

ˆPort-based and tagged VLANs

All other features in the AT-S63 Management Software are automatically deactivated when a stack is powered on.

Stacking Configuration Tips

ˆWhen stacking more than two switches, use the AT-9424Ts or AT-9424Ts/XP as the master and backup master switches.

ˆWhen adding a member switch to a stack, add one switch at a time. Ensure that the stack is up and stable before adding another member switch.

ˆAll ports are disabled during stack discovery. This means that each time you add or remove a switch from the stack, switching is suspended across all ports until the discovery process is complete.

ˆRemember that there are different configuration files for the standalone configuration and the stacking configuration. Be sure to create your desired configuration on both images in case there is a stack failure.

ˆTable sizes do NOT increase in Stack mode. The table sizes in a stack are:

—16k MAC Addresses

—2k ARP Entries

—4094 VLANs

ˆA stack can have up to four 48-port AT-9448Ts/XP Switches and two 24-port AT-9424Ts / AT- 9424Ts/XP (Master) or eight 24-port AT-9424Ts / AT-9424Ts/XP Switches.

PN 613-000915 Rev A 3 Allied Telesis, Inc.