Allied Telesis PN 613, AT-S63 manual Version

AT-S63 Version 3.1.0 Patch 1 Software Release Notes

activated if the ambient temperature exceeds 60° Celsius for five minutes, sends another SNMP trap, logs an error event message, and activates the Fault LED on the front panel.

Version 1.3.0:

ˆAdded the following new features to 802.1x port-based network access control:

—Guest VLANs

—VLAN Assignment and Secure VLAN features for supporting dynamic VLAN assignments with supplicant accounts.

—MAC address-based authentication as an alternative to 802.1x username and password authentication.

ˆSimplified the menu interface for managing the access control entries in the Management ACL.

Version 1.2.0:

ˆMLD snooping for MLDv1 and MLDv2.

ˆ802.1x port-based network access control supports up to 20 supplicants simultaneously on an authenticator port.

ˆQuality of Service has the following new actions:

—Set Type of Service (ToS)

—Move Type of Service to 802.1p Priority

—Move 802.1p Priority to Type of Service

—Send to Mirror Port

ˆThe command line interface has new command parameters for displaying and deleting specific types of MAC addresses from the MAC address table.

Version 1.1.0:

ˆLACP (802.3ad)

ˆPolicy-based QoS (Classifiers, Flow Groups, Traffic Classes, and Policies)

ˆFlash memory operations

ˆAccess Control Lists (ACLs)

ˆSyslog support

ˆPassword reset

ˆRedundant power supply information

ˆIGMP v3 Snooping

ˆNew web browser interface procedures

Version 1.0.0:

ˆAuto-Negotiation (IEEE 803.3u-compliant) for speed and duplex mode

ˆAuto and manual MDI/MDI-X

ˆFlow control (IEEE 802.3x and 802.3z-compliant)

ˆHead of line blocking prevention

ˆUnicast, multicast, and broadcast rate control

ˆPort mirroring

PN 613-000915 Rev A 11 Allied Telesis, Inc.