Allied Telesis GS900/8POE manual Unpacking the Switch

Chapter 2: Installation

Unpacking the Switch

To unpack an AT-GS900/8POE Gigabit Ethernet switch, perform the following procedure:

1. Remove all components from the shipping package.

Note

Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

2.Place the switch on a level, secure surface.

3.Ensure the following hardware components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

ˆTwo mounting brackets (for either wall- or rack-mounting)

ˆSix mounting bracket screws

ˆFour self-adhesive rubber feet (for desktop use)

ˆOne AC power cord

ˆDocumentation CD

34