Allied Telesis GS900/8POE manual Powering on the Switch, 100-240VAC~

AT-GS900/8POE Gigabit Ethernet Switch Installation Guide

2.Connect the fiber optic cable to the SFP transceiver, as shown in Figure 13.

7

8R

P
ORT			AC
1000			TIV	ITY
		LINK
10/100			LINK	ACT
PD				ACT
	ON
				PD E
				RROR

SFP

SFP8

e-X

CLA
LASER	SS1
	PRO
	DUCT

971

Powering on the Switch

Figure 13. Connecting Fiber Optic Cables to the SFP Transceiver

3. Power on the end nodes.

To power on the AT-GS900/8POE Gigabit Ethernet switch, perform the following procedure:

1.Plug the power cord into the AC power connector on the back panel of the switch, as shown in Figure 14.

100-240VAC~

780

Figure 14. Connecting the AC Power Cord

2. Plug the other end of the power cord into a wall outlet.

Warning: Power cord is used as a disconnection device. To de- energize equipment, disconnect the power cord.  E3

Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible.  E5

3. Verify that the PWR LED is green.

45