Manuals / Allied Telesis / Computer Equipment / Network Router

Allied Telesis VPN manual Create an IP Filter

Models: VPN

1 29

Download 29 pages 39.53 Kb

Page 16

Create an IP Filter

Configuring the VPN client > Create an IP Filter

Create an IP Filter

1.Click Next.

The next window, shown in the following figure, lets you specify the IP filter for the type of IP traffic the IP Security rule applies to.

2.Click Add to start creating a new filter.

This opens the IP Filter List Name window. Enter a name (e.g. “L2TP Tunnel Filter”), as shown in the following figure.

Page 16 AlliedWare™ OS How To Note: VPNs with Windows 2000 clients, without NAT-T

Image 16

Allied Telesis VPN manual Create an IP Filter

Contents

AlliedWareTM OS IntroductionConsider the following typical scenario Related How To Notes Which products and releases does it apply to?Security issue Example networkConfiguring the router Perform initial security configuration on the router1. Perform initial security configuration on the router, on this page 5. Set the router to use the configuration on pageThe configuration script Note Comments are indicated in the script below using the # symbol# add radius server=your-RADIUS-server-address secret=secret-key add ip int=vlan1 ip=office-private-LAN-address# Firewall enable fire create fire poli=main set conf=vpn.cfg Set the router to use the configurationcreate conf=vpn.cfg set conf=vpn.cfg Configuring the VPN client z Configure the connection on pageAdd a new registry entry z Add a new registry entry, on this pageAdd the IP Security Policy Management snap-in 2. Select Console Root Add/Remove Snap-InThis opens the Add Standalone Snap-In window 3. Click Add4. Click Add 5. Click Finish, then Close, then OK, to return to the Console window2. Select Create IP Security Policy Create an IP Security PolicyConfiguring the VPN client Create an IP Security Policy Configuring the VPN client Create an IP Security Policy 4. Click NextCreate an IP Security Rule 3. Click Next Page Create an IP Filter 4. Click Next This opens the IP Traffic Destination window. Select A specific IP Address from the Destination address drop-down box, as shown in the following figure. Enter the destination IP address of your Allied Telesyn router. This must be a valid Internet address 7. Click Next Configuring the VPN client Create an IP Filter8. Click Next 10. Select L2TP Tunnel Filter and click Next 9. Click Finish, then on the IP Filter List window, click Close11. Click Next 13. Click and then right-click on To Head Office, and select Assign. The policy is now assigned or enabled on your PC host, indicated by Yes in the Policy Assigned column, as shown in the following figure Configure the connection 2. Double-click the Network and Dial-Up Connection folderThe next window lets you assign an associated dialled call or select Do not dial the initial connection. Selecting Do not dial the initial connection is appropriate if you will have LAN access available before initiating the VPN call for example, if you have a cable modem 7. Click Next 10. Click Properties 11. Click OK Troubleshooting Testing the tunnelChecking the connection from the Windows client Closing the connection