Manuals / Allied Telesis / Computer Equipment / Network Router

Allied Telesis VPN manual

Models: VPN

1 29

Download 29 pages 39.53 Kb

Page 18

This opens the IP Traffic Destination window. Select A specific IP Address from the Destination address drop-down box, as shown in the following figure. Enter the destination IP address of your Allied Telesyn router. This must be a valid Internet address.

Configuring the VPN client > Create an IP Filter

5.Click Next.

This opens the IP Traffic Destination window. Select A specific IP Address from the Destination address drop-down box, as shown in the following figure. Enter the destination IP address of your Allied Telesyn router. This must be a valid Internet address.

6.Click Next.

This opens the IP Protocol Type window. Select UDP from the drop-down box, as shown in the following figure.

Page 18 AlliedWare™ OS How To Note: VPNs with Windows 2000 clients, without NAT-T

Image 18

Allied Telesis VPN manual

Contents

Introduction AlliedWareTM OSConsider the following typical scenario Related How To Notes Which products and releases does it apply to?Security issue Example network1. Perform initial security configuration on the router, on this page Configuring the routerPerform initial security configuration on the router 5. Set the router to use the configuration on page# add radius server=your-RADIUS-server-address secret=secret-key The configuration scriptNote Comments are indicated in the script below using the # symbol add ip int=vlan1 ip=office-private-LAN-address# Firewall enable fire create fire poli=main Set the router to use the configuration set conf=vpn.cfgcreate conf=vpn.cfg set conf=vpn.cfg Add a new registry entry Configuring the VPN clientz Configure the connection on page z Add a new registry entry, on this pageAdd the IP Security Policy Management snap-in 2. Select Console Root Add/Remove Snap-In4. Click Add This opens the Add Standalone Snap-In window3. Click Add 5. Click Finish, then Close, then OK, to return to the Console windowCreate an IP Security Policy 2. Select Create IP Security PolicyConfiguring the VPN client Create an IP Security Policy Configuring the VPN client Create an IP Security Policy 4. Click NextCreate an IP Security Rule 3. Click Next Page Create an IP Filter 4. Click Next This opens the IP Traffic Destination window. Select A specific IP Address from the Destination address drop-down box, as shown in the following figure. Enter the destination IP address of your Allied Telesyn router. This must be a valid Internet address Configuring the VPN client Create an IP Filter 7. Click Next8. Click Next 10. Select L2TP Tunnel Filter and click Next 9. Click Finish, then on the IP Filter List window, click Close11. Click Next 13. Click and then right-click on To Head Office, and select Assign. The policy is now assigned or enabled on your PC host, indicated by Yes in the Policy Assigned column, as shown in the following figure Configure the connection 2. Double-click the Network and Dial-Up Connection folderThe next window lets you assign an associated dialled call or select Do not dial the initial connection. Selecting Do not dial the initial connection is appropriate if you will have LAN access available before initiating the VPN call for example, if you have a cable modem 7. Click Next 10. Click Properties 11. Click OK Testing the tunnel TroubleshootingChecking the connection from the Windows client Closing the connection