Manuals / Allied Telesis / Computer Equipment / Network Router

Allied Telesis VPN manual Set the router to use the configuration, set conf=vpn.cfg

Models: VPN

1 29

Download 29 pages 39.53 Kb

Page 7

Configuring the router > Set the router to use the configuration

Set the router to use the configuration

After loading the configuration onto the switch, set the router to use the script after a reboot. If you named the script vpn.cfg, enter the command:

set conf=vpn.cfg

If you entered the configuration directly into the command line instead of loading the script, save the configuration by entering the commands:

create conf=vpn.cfg

set conf=vpn.cfg

Page 7 AlliedWare™ OS How To Note: VPNs with Windows 2000 clients, without NAT-T

Image 7

Allied Telesis VPN manual Set the router to use the configuration, create conf=vpn.cfg set conf=vpn.cfg

Contents

AlliedWareTM OS IntroductionConsider the following typical scenario Which products and releases does it apply to? Related How To NotesExample network Security issue5. Set the router to use the configuration on page Configuring the routerPerform initial security configuration on the router 1. Perform initial security configuration on the router, on this pageadd ip int=vlan1 ip=office-private-LAN-address The configuration scriptNote Comments are indicated in the script below using the # symbol # add radius server=your-RADIUS-server-address secret=secret-key# Firewall enable fire create fire poli=main set conf=vpn.cfg Set the router to use the configurationcreate conf=vpn.cfg set conf=vpn.cfg z Add a new registry entry, on this page Configuring the VPN clientz Configure the connection on page Add a new registry entry2. Select Console Root Add/Remove Snap-In Add the IP Security Policy Management snap-in5. Click Finish, then Close, then OK, to return to the Console window This opens the Add Standalone Snap-In window3. Click Add 4. Click Add2. Select Create IP Security Policy Create an IP Security PolicyConfiguring the VPN client Create an IP Security Policy 4. Click Next Configuring the VPN client Create an IP Security PolicyCreate an IP Security Rule 3. Click Next Page Create an IP Filter 4. Click Next This opens the IP Traffic Destination window. Select A specific IP Address from the Destination address drop-down box, as shown in the following figure. Enter the destination IP address of your Allied Telesyn router. This must be a valid Internet address 7. Click Next Configuring the VPN client Create an IP Filter8. Click Next 9. Click Finish, then on the IP Filter List window, click Close 10. Select L2TP Tunnel Filter and click Next11. Click Next 13. Click and then right-click on To Head Office, and select Assign. The policy is now assigned or enabled on your PC host, indicated by Yes in the Policy Assigned column, as shown in the following figure 2. Double-click the Network and Dial-Up Connection folder Configure the connectionThe next window lets you assign an associated dialled call or select Do not dial the initial connection. Selecting Do not dial the initial connection is appropriate if you will have LAN access available before initiating the VPN call for example, if you have a cable modem 7. Click Next 10. Click Properties 11. Click OK Troubleshooting Testing the tunnelChecking the connection from the Windows client Closing the connection