Connecting 9~40VDC power line with the BWS-136 terminal block or the power jack. If the power is properly supplied, the Power LED will keep solid yellow color.
Connecting Ethernet Port
Connect a RJ45 Ethernet cable to the Ethernet port of BWS-136. The Link/Activity light will keep solid yellow color if Ethernet cable is corrected to the network and this light will keep flashing if there are data transmitted.
Connecting Serial Port
Use a null modem DB9 serial cable to connect a RS232 serial device to BWS-136 serial port. The null modem cable will cross over the RxD to TxD connection between the serial device to Aport 211.
Switch SW1 Settings
Set the SW1 setting to RS-232 mode and pin definition of Aport
211 serial port is as follow:
BWS-136 User Manual_amend.doc | - 8 - |
