SW1 Setting:
SW1 Key | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
ON | OFF | OFF | - | - | |
|
|
|
|
|
|
OFF | OFF | OFF | - | - | |
|
|
|
|
|
|
OFF | ON | ON | - | - | |
|
|
|
|
|
|
Normal | - | - | - | OFF | OFF |
|
|
|
|
|
|
DHCP |
|
|
| OFF | ON |
|
|
|
|
|
|
Default |
|
|
| ON | OFF |
|
|
|
|
|
|
Console |
|
|
| ON | ON |
|
|
|
|
|
|
|
|
|
|
|
|
Normal: Aport is in Normal Operation Mode
DHCP: Network IP Address is assigned by DHCP Server
Default: All the settings are reset to Factory Default.
Console: COM1 serial port is served as console port. User can use ACSII command to configure
Changing the switch settings will not be effective until system reboot by pressing RESET button
- 9 - |
LED Status
The LED provides the
Power LED: Power LED keeps ON if power (+9VDC to +40VDC) is correctly input to
Ready LED: Ready LED keeps ON when Aport 211 firmware is ready for operation. Ready LED will be flash when Aport 211 in Serial Console mode (SW1 key 4 and key 5 are ON) or Telnet Console mode (Telnet Console port:5001 are connected) Link/Act LED: Link and Activity LED will turn ON when the Ethernet cable is connected. When there is network data traffic, this LED will be flash.
RX/TX LED: The RX/TX LED is a dual color LED that indicates the serial data traffic. In
- 10 - |
