23
(1) Speed
There are five modes— Auto, 100M Full, 100M Half, 10M Full,
and 10M Half—for speed selections. To change the speed setting,
highlight Port and enter the port number to select the desired port,
next highlight Speed, click Enter, and use Space Bar to switch
between the five different options.
(2) Flow Control
This setting determines whether or not the Switch will be
handling flow control. To change the flow control setting,
highlight Port and enter the port number to select the desired port.
Set FlowCtrl to ON for avoiding data transfer overflow. Or set it
to OFF where there is either no flow control, or this is handled
by other hardware/software management.
(3) QoS
If some ports need to have priority for data management transfer,
then QoS can be changed. QoS has two settings to choose from,
High and Low. The default setting for QoS on all ports is High.
To change the QoS setting, highlight Port and enter the port
number to select the desired port. Set QoS as required to
determine which ports will always transfer their data first.
(4) Link Status
This value is automatically determined by the Switch and can’t
be changed. If there is a valid connection to the Switch through
the indicated port, the Link Status will show the connection speed.
The status will be Down if there is no connection through that
port.
¾ VLAN (Virtual Local Area Network)