6
Features
¾ 24×10/100Mbps Auto-negotiation Ethernet ports
¾ All ports support auto MDI/MDIX, so there is no need
to use cross-over cables or an up-link port
¾ Full/half duplex transfer mode for each port
¾ Wire speed reception and transmission
¾ Store-and-Forward switching scheme capability to
support rate adaptation and ensure data integrity
¾ Broadcast storm protection
¾ Up to 4K unicast addresses entities per device, self-
learning, and table aging
¾ 256KBytes on-chip packet buffer for each eight ports
¾ Supports IEEE 802.3x flow control for full-duplex
mode ports
¾ Supports Back-pressure flow control for half-duplex
mode ports
¾ Optional one port 100BASE-FX Fibre module in the
rear panel for length extension
¾ Supports Port-base VLAN and IEEE 802.1p QoS
¾ RS-232 DCE console port for setting up and manage
the Switch via connection to a console terminal or PC
using a terminal emulation program