24
Grouping of individual ports into a small “virtual” network of
their own being independent of all other ports. To change the
VLAN, locate the port that needs to be set, select “V” for joining
the VLAN group and “-” for not joining. The default setting of
VLAN is shown as Figure 14.
Figure 14. VLAN Configuration
For example, there are five computers (PC1~PC5) connected to
the Switch’s port 1~5. They had been divided into two VLAN
groups: VLAN1 (PC1~PC4) and VLAN2 (PC2~PC5). There is
no way to connect PC1 and PC5, as shown in Figure 15. If PC1
has to connect to PC5, it should with it in the same VLAN.