C: INSTALLING THE OPERATOR

WARNING

FRONT MOUNTING BRACKET MUST BE INSTALLED TO A STRUCTURAL SUPPORT (STUD) ON THE HEADER WALL. FAILURE TO DO SO COULD CAUSE SENSING SYSTEM TO MALFUNCTION, RESULTING IN ENTRAPMENT, INJURY OR DEATH. REINFORCE HEADER USING 2 x 6 WOOD STUDS AND LAG SCREW OR ANGLE IRON AND LAG SCREWS AS NECESSARY (NOT PROVIDED).

VERTICAL

HORIZONTAL CENTERLINE LINE

STEP 1: Mounting the Front Bracket: Mark a vertical centerline on the header above the door. By manually raising the door, determine the high arc of the door’s travel (see illustration, top of previous page) and using a level, transfer this measurement to the header (see illustration at left). Draw a horizontal line, crossing the previously drawn centerline, at this point. Install the Front Mounting Bracket securely wit lag screws as shown below. If necessary, reinforce the header with steel angle iron or wood to ensure a secure mount.

104369

Mount the Front Mounting Bracket securely with lag screws as shown in figure at right. If necessary, reinforce the header with steel angle iron or wood to ensure a secure mount.

STEP 2: Raise the front of the Rail/Chain assembly so that the Front Rail Bracket and Wall Mounting Bracket align. Insert the 1/4” x 4” bolt and tighten nut loosely for now. Later in the installation, this nut must be tightened securely.

110050-1

Wall

Mounting

Bracket

Wall Mounting Bracket

Nut

1/4” x 4”

Hex Head Bolt

Cardboard or Cloth to protect the Housing

110049

1/2” Above

High Arc Mark

Front Wall

Bracket

 

 

Center of

 

 

Door

High Arc Mark

 

 

 

STEP 3 — Raise the Opener and rest the Power Unit on a ladder or other sturdy support. Open the door the full open position. Allow 2" of space between the Tee Rail and the top section of the door (as shown in the illustration, below on the right).

SECTIONAL DOORS AND ONE-PIECE DOORS

WITH TRACK

NOTE: Since the Opener will be secured permanently in this position, open and close the door a few times to be sure the door does not rub on the Tee Rail and that you have allowed the proper clearances before proceeding.

ALLOW 2” BETWEEN TOP OF DOOR AND RAIL

DOOR FULLY

OPEN

8

Page 7 Page 9
Page 8
Image 8
Allstar Products Group LT 50 owner manual Sectional Doors and ONE-PIECE Doors With Track
Page 7 Page 9

LT 50 specifications

Allstar Products Group LT 50 is a versatile and innovative product that has garnered attention for its efficiency and practicality. Designed with the modern consumer in mind, the LT 50 excels in various applications, making it a valuable addition to any home or workspace.

One of the standout features of the LT 50 is its impressive performance capabilities. Equipped with a powerful motor, this device is engineered to deliver quick and reliable results, whether it’s for light-duty tasks or more demanding jobs. The motor is designed to operate quietly, which enhances user experience, allowing for use in environments where noise might be a concern.

The LT 50 integrates advanced technologies that contribute to its ease of use and versatility. It boasts an ergonomic design, which ensures that the user can comfortably handle the device for extended periods. This thoughtful design extends to its controls, which are user-friendly and intuitive. The layout of buttons and switches allows for seamless operation, making it ideal for both seasoned users and novices alike.

Built with durability in mind, the LT 50 uses high-quality materials that withstand wear and tear over time. This longevity ensures that the product remains reliable throughout its lifespan, providing excellent value for consumers who seek dependable performance. Additional safety features are incorporated to prevent accidents and enhance user protection, making it a smart choice for families.

In terms of versatility, the LT 50 can be adapted for a range of tasks. Whether it’s household projects, maintenance work, or creative endeavors, this product has proven to be highly efficient. Its compact size makes it easy to store, and its lightweight construction facilitates portability, allowing users to take it wherever it's needed without hassle.

Furthermore, the LT 50 boasts excellent energy efficiency, making it an environmentally friendly option. By minimizing energy consumption while maximizing performance, it aligns perfectly with sustainable practices, catering to the growing number of eco-conscious consumers.

In conclusion, Allstar Products Group LT 50 is a well-rounded product that emphasizes performance, durability, and user-friendliness. Its innovative features and reliable technology make it an essential tool for everyday tasks, ensuring that consumers can tackle projects with ease and confidence. With the LT 50, users can expect nothing short of quality and efficiency in their endeavors.
Top Page Image Contents