39
English
CD Operation
Titling Disc (Continued)Press the TITLE button to store the first
character. The first character will stop blinking
and the display will automatically advance to
the next character. When that character begins
to blink, you may choose the next letter or
symbol of your title.
Repeat the steps – above to complete the
titling. Pressing the TITLE button after entering
the 12th character, automatically stores the title
into memory.
In case of storing a title of less than 12
characters:
For example, after 3rd digit character is
completed, 4th digit character is blinking. Then,
go to step .
Press and hold the TITLE button for at least 2
seconds to record the title.
Notes:
• You can not enter a title in clock mode. For
the clock display, refer to “Displaying Time”,
on page 17.
• When the display shows "Full Data", the
memory is full and no input is accepted. In
order to input new titles, old titles must be
deleted first. Refer to the section "Erasing
Disc Title" on page 40 to delete titles.
• To erase the title name in the CD mode,
select (Blank) in the table <Characters and
Symbols> on page 37 and enter as de-
scribed in the operating procedures above.
5
6
7
TITLE
CLK
TITLE
CLK