Alpine CDA-7846E owner manual Multi-Changer Selection, Remote Control

RUE-4185

English

CD Shuttle Operation

Multi-Changer Selection

Alpine’s Ai-NET system will support up to 6 CD Shuttles. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Shuttles. If you use 2 Switching devices, you can connect up to 6 CD Shuttles.

BAND	SOURCE	A.PROC
PROG

Remote Control

1

SOURCE

SOURCE

Press the SOURCE button on the CDA-7846E to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Controller (RUE-4185) to activate the CD Shuttle mode. Proceed to Step below to select the desired CD Shuttle.

2

Press the BAND button on the CDA-7846E or

BANDthe RUE-4185 to activate the CD Shuttle

T.S.M.

Selection mode.

3

BAND T.S.M.

Changer-X

The CD Shuttle Selection mode remains active for 3 seconds after Step is performed. Press the BAND button until the desired CD Shuttle indicator appears on the display.

Note: If the selected CD Shuttle is not con- nected, the display will show "No Changer X".

44