Alpine CDA-7867, CDA-7969 CD Player Operation

20-EN
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be
connected to the CDA-7969/CDA-7867 if it is Ai-
NET compatible. With a CD Changer connected
to the Ai-NET input of the CDA-7969/CDA-7867,
the CD Changer will be controllable from the
CDA-7969/CDA-7867.
Using the KCA-400C (the Multi-Changer Switching
device) multiple changers can be controlled by the
CDA-7969/CDA-7867.
See the Multi-Changer Selection section on page
21 for selecting the CD Changers.
NOTES
•The controls on the CDA-7969/CDA-7867 for CD
Changer operation are operative only when a CD
Changer is connected.
•The "Changer" indicator illuminates in the CD Changer
mode.
1Press the SOURCE button to activate the
CHANGER mode. The display shows the
"Changer," disc number and track number.
NOTE
The source indicator varies depending on the connected
source.
2Press the Disc Select buttons (F1 through F6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
•After selecting the desired disc, you can operate in the
same way as for the CDA-7969/CDA-7867 CD player.
For details, please see the CD Operation section.
•If the FUNC indicator is illuminated the Disc Select
buttons become nonfunctional.
CD Player Operation
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the
procedure is the same as for the 6-disc CD
Changer. To select discs numbered from 7 to 12,
first press the "F" button. This changes the "D"
indicator to "d." Then press the desired Preset
button. With the "F" button activated, the Preset
buttons 1 to 6 will represent discs 7 to 12
respectively.
SOURCE
A. ME c
f UP
DN g
Select buttons (F1 through F6)