6-EN
Subwoofer On and Off
1Press and hold the INTLZ button for at least 2
seconds.
2Press the f UP button repeatedly to select
"SUB-W."
Each press of the f UP button changes the
modes as shown:
∗ CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3Press the TUNE button to toggle mode between
SUB-W ON and SUB-W OFF.
If an Ai-NET compatible processor with
Subwoofer output is connected:
Press the TUNE button after selecting the SUB-W
ON mode, and the subwoofer output phase is
toggled NORMAL (0°) or REVERS (180°).
4Press and hold the INTLZ button for at least 2
seconds after setting the SUB-W ON.
5Press the MODE button repeatedly to select the
SUB-W mode.
6Rotate Audio Control knob until the desired
sound is obtained in each mode.
Basic Operation
INTLZ CLK
TUNE DN g f UP
Audio Control MODE
→ SUB-W → BALANCE
VOLUME ←FADER ←
Changing Lighting Color
1Press and hold the INTLZ button for at least 2 seconds.
2Press the f UP button repeatedly to select
"AMBER".
Each press of the f UP button changes the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
∗ CDA-7969 Only
3
Press the TUNE button to toggle the mode between
AMBER ON (amber) and AMBER OFF (green).
4Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you
feel the unit's backlighting is too bright at night.
1Press and hold the INTLZ button for at least 2
seconds.
2Press the f UP button repeatedly to select
"DIM"(DIMMER).
Each press of the f UP button scrolls the
modes as shown:
∗ CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3Press the TUNE button to select the Dimmer mode.
Each press toggles between DIMMER AUT O
and DIMMER MANU.
4Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←