Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

∙Be sure to disconnect the cable from the (–) battery post before installing your CDA-7969/CDA-7867. This will reduce any chance of damage to the unit in case of a short-circuit.

∙Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

∙When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA- 7969/CDA-7867 to the fuse box, make sure the fuse for the intended circuit of the CDA-7969/CDA-7867 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

∙The CDA-7969/CDA-7867 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

∙Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

26-EN

Page 27 Page 29
Page 28
Image 28
Alpine CDA-7969, CDA-7867 owner manual Installation and Connections, Precautions
Page 27 Page 29

CDA-7969, CDA-7867 specifications

The Alpine CDA-7867 and CDA-7969 are two notable car audio receivers that have gained recognition among enthusiasts for their advanced features, user-friendly interfaces, and superior sound quality. Both models showcase Alpine's commitment to delivering high-performance audio solutions for automotive environments.

The Alpine CDA-7867 stands out with its sleek design and a vibrant, illuminated display. It supports MP3/WMA playback, allowing users to enjoy their favorite digital music files with ease. The device comes equipped with a built-in 24-bit Digital-to-Analog Converter (DAC), which enhances sound clarity and detail. An integrated 4-channel amplifier powers up to 50 watts per channel, ensuring a robust audio experience. The CDA-7867 also supports CD playback, providing versatility for users who still enjoy traditional media. Its customizable equalizer features multiple preset options and a 3-band parametric EQ, enabling users to tailor the sound profile to their preferences.

On the other hand, the Alpine CDA-7969 boasts advanced features that cater to tech-savvy users. It includes a detachable faceplate for additional security, making it an attractive option for those concerned about theft. This model is also equipped with a progressive scan CD mechanism, resulting in seamless playback and improved disc handling. The CDA-7969 offers Bluetooth compatibility, allowing for hands-free calling and wireless music streaming from smartphones. Furthermore, it features a comprehensive set of inputs, including USB ports and auxiliary inputs, expanding the connectivity for various audio sources.

Both models utilize Alpine's proprietary sound processing technologies, which optimize acoustic performance for enhanced listening experiences. The dedicated subwoofer output available in both units allows for the easy integration of subwoofers, amplifying low-frequency sounds and producing a fuller audio spectrum.

In summary, the Alpine CDA-7867 and CDA-7969 are excellent choices for those seeking high-quality car audio systems. With their blend of traditional and modern technologies, these receivers cater to a wide range of audio preferences, ensuring that users can enjoy their favorite music with exceptional clarity and power. Whether selecting the CDA-7867 for its straightforward functionality or the CDA-7969 for its advanced features, both models are designed to elevate the in-car audio experience to new heights.
Top Page Image Contents