19-EN
SAT Radio Receiver (Optional)
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following operations
may be performed. However, the XM Receiver and SIRIUS
Receiver cannot be connected at the same time.
Receiving Channels with the SAT Radio
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with
over 100 digital audio channels. For a small monthly fee, subscribers
can hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite. For more information, visit XM’s website at
www.xmradio.com., or SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XM Direct™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter
will be required. For details, consult you nearest ALPINE dealer.
*XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
*Sirius and its corresponding logos are trademarks of Sirius
Satellite Radio Inc.
•The SAT Receiver controls on the CDA-9851 are operative only
when a SAT Receiver is connected.
1Press SOURCE/POWER to select SAT Radio mode.
2Press BAND to select between one of the three
SAT Radio Preset Bands.
Each press changes the band:
XM mode:
XM1 → XM2 → XM3 → XM1
SIRIUS mode:
SR1 → SR2 → SR3 → SR1
3Press 8 or 9 to select desired category.
4Press g or f to select the desired channel.
Holding down g or f will change channels
continuously.
•When using the optional remote control (RUE-4190), an SAT Radio
Channel can be directly called up with the numeric keypad of the
remote control.
1While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2Press ENTER on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number is input.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found
on the SAT Receiver.
It can also be displayed on the screen of the CDA-9851 in the
following way.
1While receiving band, press g or f to select
channel “0.”
The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
While displaying “RADIO ID” as shown above,
Demonstration (page 17) become nonfunctional.
2To cancel the ID number display, set the channel to
other than “0.”
•You cannot use “O,” “S,”“ I,” or “F” for the ID Number (XM
radio Receiver only).
•You can check the ID number printed on a label on your third
party, SAT Radio Receiver package.
SOURCE/
POWER
Preset buttons
(1 through 6)
BAND
f g
TITLE
Rotary
encoder
8
9