7-EN
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.
Detaching and Attaching the Front Panel
Detaching
1Turn off the unit power.
2Press (Release) at the upper left side until the
front panel pops out.
3Grasp the left side of the front panel and pull it out.
•The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
•To protect the front panel, place it in the supplied carrying case.
Attaching
1Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2Push the left side of the front panel until it locks
firmly into the main unit.
2
1
1
•Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
•Attach the front panel carefully. Hold the panel by its sides to avoid
pushing any buttons by mistake.
Continued
Radio
Changing the Radio Frequencies for each
Country
For customers not living in North America, change the radio
frequencies as follows.
1Press MENU to select the SETUP mode.
2Select the “AREA” mode by pressing g or f.
3Choose either AREA 1 or AREA 2 by turning the
Rotary encoder.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
4Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
•The stored radio stations will be cleared every time you change the
setting.
Listening to Radio
1Press SOURCE/POWER until a radio frequency
appears in the display.
2Press BAND repeatedly until the desired radio
band is displayed.
FM1 → FM2 → AM → FM1
3Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
•The initial mode is DX SEEK (Distance mode).
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
SOURCE/
POWER BAND
g f
TUNE/
A.ME
Preset buttons
(1 through 6)
Rotary encoder
MENU