26-EN
Battery Replacement
Applicable battery: Use two “AAA” sized dry batteries or equivalent.
1Opening the battery cover
Slide out the battery cover while firmly pressing in the
direction of the arrow.
2Replacing the battery
Insert the batteries, observing the polarities as illustrated.
3Closing the cover
Slide the cover as illustrated until a click is heard.
Information
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items in
the following checklist. This guide will help you isolate the problem
if the unit is at fault. Otherwise, make sure the rest of your system is
properly connected or consult your authorized Alpine dealer.
Basic
No function or display.
•Vehicle's ignition is off.
-If connected following instructions, the unit will not
operate with the vehicle's ignition off.
•Improper power lead connections.
-Check power lead connections.
•Blown fuse.
-Check the fuse of the unit; replace with the proper value if
necessary.
•Internal micro-computer malfunctioned due to interference
noise etc.
-Press the RESET switch with a ballpoint pen or other
pointed article.
Radio
Unable to receive stations.
•No antenna or open connection in cable.
-Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
•You are in a weak signal area.
-Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
-Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
•The antenna may not be the proper length.
-Make sure the antenna is fully extended; if broken, replace
the antenna with a new one.
Broadcast is noisy.
•The antenna is not the proper length.
-Extend the antenna fully; replace it if it is broken.
•The antenna is poorly grounded.
-Make sure the antenna is grounded properly at its mounting
location.
Point the remote control transmitter at the remote control
sensor.
Connectable to Steering Remote Control Interface
Box
You can operate this unit from the vehicle’s control unit
when an Alpine Steering Remote Control Interface Box
(optional) (for sale in the near future) is connected. For
details, contact your Alpine dealer.
Remote control sensor