16-EN
Titling Discs/Stations
It is possible to title your favorite CD's or radio stations.
You cannot input titles for MP3/WMA discs.
1Press TITLE and select the Title Display.
For details, see “Displaying the Title/Text” (page 15).
2Press and hold TITLE for at least 2 seconds. The
first character will blink.
3Press BAND to select the characters/symbols.
Upper case → Lower case → Numeral/Symbol → Upper case
4Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
5Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
6Repeat steps 3 and 5 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 7 to complete the title.
7Press TITLE to record the title.
•If you cancel while entering a title, selected characters are not
written.
•You can enter 24 radio station titles and 18 CD titles on this unit. If
you try to store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored. To input a new
title, one of the previously inputted titles must first be deleted.
•The CD Changer title length or memory capacity varies depending
upon the model being used.
•When you want to erase a title, enter the “ ” symbol into all
spaces.
•The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be canceled if no action is taken for
over 10 seconds.
Erasing Disc Title/Station Title
1Press TITLE to select the Title Display. Then, press
again and hold for at least 2 seconds.
2Press and hold -/J for at least 2 seconds.
The title in the display will blink.
3Press g or f repeatedly until the title you
want to erase is displayed.
4Press and hold -/J for at least 2 seconds to erase
the title displayed.
5Press TITLE to cancel the title erasing mode.
•You cannot erase CD-TEXT.
•"NO DATA" is displayed for 2 seconds if the title is not input in
step 2, or if all titles are erased in step 4.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Title/Text” (page 15).
•Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
•When the power is off but the ignition key is on, press TITLE to
display the time.