Alpine CDE-7872 Displaying Time, Setting the AUX Mode CDM-7874only, Basic Operation, 6-EN

Basic Operation

SOURCE BAND Rotary encoder g DN BAND 2 f UP

g DN BASS C. TREBLE C. DISP SETUP f UP

(CDM-7874)

CENTER f 1 DISP

(CDE-7872/CDE-7870)

Setting the AUX Mode (CDM-7874 only)

You can input TV/video sound by connecting an optional "M-Bus V-Link" (M-Bus/RCA interface cable KCM-122B) to this component.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the g DN or f UP button to select the AUX mode.

3 Press the BAND button to toggle the mode between AUX ON and AUX OFF.

4 Press the SETUP button to return to normal mode.

5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.

→TUNER → CD → AUX

NOTE

When AUX ON is selected, a CD Changer cannot be used.

Displaying Time

1 Press the DISP button repeatedly until the clock time is displayed.

Each press changes the modes as follows:

Radio mode

Radio frequency ↔ Clockmode priority

CDM-7874: CD Player and Changer modes

	→	Playing time			→	Clock priority
		mode				mode
CDE-7872/CDE-7870: CD Player mode
							→
→	Track No.		→	Playing time				Clock priority
	mode			mode				mode

NOTE

Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.

6-EN