Indication for CD Player

HI TEMP

Protective circuit is activated due to high temperature.

-The indication will disappear when the temperature returns to normal operating range.

NO DISC

No CD is inserted.

-Insert a CD.

Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

Press the c button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

ERROR

Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

When “ERROR” is displayed:

If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 5) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

The disc is not compatible with the unit.

- Insert a disc which is compatible with the unit.

UNSUPORT

(CDE-9846 only)

The disc is not written in a MP3 supported format. - Use a disc written at the MP3 supported format.

Specifications

FM TUNER SECTION

 

Tuning Range

87.7 – 107.9 MHz**

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

Alternate Channel Selectivity

80 dB

Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

Capture Ratio

2.0 dB

AM TUNER SECTION

 

Tuning Range

530 – 1,710 kHz**

Sensitivity (IEC Standard)

22.5 µV/27 dB

CD PLAYER SECTION

 

Frequency Response

5 – 20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Below measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

PICKUP

 

Wave length

795 nm

Laser power

CLASS I

GENERAL

 

Power Requirement

14.4 V DC

 

(11–16 V allowable)

Power Output

16 W RMS 4*

*Primary amplifier ratings per CEA-2006 Standard

Power output: measured at 4 Ohms and 1% THD+N

S/N: 80 dBA (reference: 1 W into 4 Ohms)

Bass

+20 dB/-14 dB at 100 Hz

Treble

±14 dB at 10 kHz

Maximum Pre-Output Voltage

2 V/10 k ohms

Weight

1.6 kg (3 lbs. 8 oz)

CHASSIS SIZE

 

Width

178 mm (7")

Height

50 mm (2")

Depth

160 mm (6-1/4")

NOSEPIECE SIZE

 

Width

170 mm (6-3/4")

Height

46 mm (1-13/16")

Depth

18 mm (11/16")

¥Due to continuous product improvement, specifications and design are subject to change without notice.

**CDE-9846:

When you choose ÒAREA 2Ó in the section ÒChanging the Radio Frequencies for each CountryÓ (page 6), the tuning range is as follows.

FM : 87.5 - 108.0 MHz

AM : 531 - 1,602 kHz

19-EN

Page 20
Image 20
Alpine CDE-9846 owner manual Specifications, 19-EN