Installation |
|
Accessory List |
|
¥ Head unit | 1 |
¥ Power cable | 1 |
¥ Mounting sleeve | 1 |
¥ Carrying case | 1 |
¥ Bracket | 2 |
¥ Screw (M5 ⋅ 8) | 4 |
¥ OwnerÕs Manual | 1 set |
Note:
The main unit must be mounted within 35 degrees of the horizontal
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicleÕs chassis.
¥For the screw marked **, use an appropriate screw for the chosen mounting location.
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the
plane, back to front.
Less than 35¡
1
No Pressure Here
No Pressure Here
Mounting Sleeve (Included)
Dashboard
3 Slide the
Removal
1Remove the DETACHABLE FRONT PANEL.
2Insert the brackets into the back, along the guides on either side of the unit. The unit can now be removed from the mounting sleeve.
This unit
Bracket (included)
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Remove the Detachable Front Panel (refer to page 5). Slide mounting sleeve from main unit. (see ÒRemovalÓ on this page).
Slide the mounting sleeve into the dashboard.
¥Please examine the installation. Make certain that no external pressure is applied to either the top of the unit or the removable nosepiece.
2
Screw
Hex Nut (M5) |
|
** | Bolt Stud |
|
Metal
Mounting
Strap
*
Ground Lead
Chassis
Front Frame
Screws (M5 ⋅ 8)
(Included)
Ground Lead
* 
Mounting Bracket
¥Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicle's chassis.
