Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Press (MUTE)/RTN to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing (MUTE)/RTN again will bring the audio back to its previous level.
Setting Time
1 Press and hold A.SEL/SETUP for at least 2 seconds to activate the SETUP mode.
2 Turn the Rotary encoder to select the CLOCK ADJ mode, and then press / /ENT.
The time indication will blink.
3 Turn the Rotary encoder to adjust the hours while the time indication is blinking.
4 When the hour has been adjusted, press / /ENT.
5 Turn the Rotary encoder to adjust the minutes while the time indication is blinking.
6 Press and hold A.SEL/SETUP for at least 2 seconds to return to normal mode.
•To synchronize the clock to another clock/watch or radio time
announcement, press and hold / /ENT for at least 2 seconds after setting the “hour.” Minutes will reset to “00”. If the display shows over “30” minutes when you do this, the time will advance one hour.
•Pressing /RTN will return to the previous mode.
•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.
Radio
TUNE/A.ME SOURCE/ BAND
Preset buttons (1 through 6)
Listening to Radio
1 Press SOURCE/ to select TUNER mode.
2 Press BAND repeatedly until the desired radio band is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3 Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK
•The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press or to tune in the desired station.
Holding down or will change the frequency continuously.