Alpine DVA-5205 owner manual Adjusting the volume, Press NTSC/PAL for at least 5 seconds

Switching between NTSC and PAL configuration Adjusting the volume

Switching between NTSC and PAL configuration

Switch the video output configuration to NTSC or PAL according to the type of television and the disc recording method.

Press NTSC/PAL for at least 5 seconds.

POWER

NTSC/PAL

Notes:

•NTSC is the standard and there is no need to change the setting. The system is set to NTSC at time of shipment from the factory.

•The image output configuration must be correct. Otherwise the following message appears and playback does not start: “VIDEO SIGNAL SYSTEM IS NOT CORRECT”.

	DVD	Video CD
	• Using the Number Keys.	CD
Tips	This describes use of the Number
	Keys, particularly the +10 key.

To input 10: Press the +10 key once and then press the 0 key.

To input 16: Press the +10 key once and then press the 6 key.

To input 23: Press the +10 key twice and then press the 3 key.

*Each time the +10 key is pressed, the number increases by one decimal.

Adjusting the volume

Adjust the volume for connecting only with the Digital Audio Processor (PXA- H510).

Move the rotary encoder to the right or left.

Turn to the right to increase the volume. Turn to the left to decrease the volume.

DN	V	OL
OL			UP
V

Note:If an Ai-NET product (head unit) has been connected in addition to the Digital Audio Processor (PXA-H510), or if this equipment is connected singly to a TV monitor, adjust the volume on the connected equipment.

11