Alpine owner manual Press Source , Audio SEL or A. SELto set the CD DVA-5205, Mode

Operating from the head unit’s remote control unit

	ENT
ENT
SOURCE	AUDIO
	SEL

ENT

A.SEL

MENU

RUE-4185 RUE-4160 RUE--4165

Operating DVDs, video CDs and CDs

First see “Remote control operations” (page 58).

1	Press “SOURCE” , “AUDIO SEL” or “A. SEL”to set the CD (DVA-5205)
	mode.
	The DVA-5205’s power is on when the CD mode is selected, off when other modes are
	selected.
2	To set the pause mode, press “		” or “ENT”.
	Press “	” or “ENT” again to resume playback.
3	Press and hold “ c” or “ f” continuously to make FF or RW operation.
	(RUE-4185, RUE-4160)
	Tilt and hold the joystick in left or right direction to make FF or RW opera-
	tion. (RUE-4165)
4	Press “ c” or “ f” to make a track or chapter skip. (RUE-4185, RUE-4160)
	Tilt the joystick in left or right direction to make a track or chapter skip.
	(RUE-4165)

Notes:

•For adjusting the volume and other basic operations, refer to the head unit’s operating instructions.

•For video CDs with playback control (PBC), turn PBC off.

Warning	Do not operate or view the display while driving.
	Drivers should not operate the product or view the display while driving. Doing so
	could be distracting, leading to accidents. Always stop the vehicle in a safe place
	before operating the product or viewing the display.

59