Alpine DVA-5205 Loading and unloading discs

9
DVD
OPEN
POWER
DVD
OPEN
POWER
DVD
OPEN
POWER
DVD
Loading and unloading discs
Turn on the power before loading and unloading discs.
(Refer to page 10 “Turning the power on and off”.)
Loading discs
Press the door in gently then
slide it downwards.
Insert the disc with the side
containing words or diagrams
facing upwards.
Once the disc is partially inserted, it is
drawn in automatically. Playback starts.
Notes:
• If the ignition key is on ACC or ON, a disc can be
inserted even when the power is OFF. The power
then goes ON automatically.
• Never insert a navigation map disc. If inserted it
may cause a failure.
• For two-sided DVDs, play one side of the disc to
the end, then unload the disc, turn it over and
reload it to play the other side.
Refer to the indications on the disc (“Side 1”/”Side
2”).
• Never insert map discs for navigation purposes
as they could damage the equipment.
• If wrong disc, upside-down discs or dirty discs
have been inserted, “DISC ERROR” is displayed.
Open the door and remove the disc.
Close the door.
Be sure to close the door to prevent dust
from getting inside.
Unloading discs
Press the door in gently then
slide it downwards. The disc is
automatically ejected part way.
If the disc is not removed, it is automati-
cally drawn back into the player after a
while.
DVD
CD
Video CD
Loading and unloading discs
Caution
Never close the door while the disc
is being unloaded. Doing so could
scratch the disc or damage the
player.
Note: If the ignition key is on ACC or ON, a disc
can be removed even when the power is
OFF. After removing the disc, the power
goes OFF again automatically.