6-EN
Battery Replacement
Applicable battery: Use two “AAA” sized dry batteries or
equivalent.
1Opening the battery cover.
Push on the cover and slide it as indicated by the
arrows then the cover will be removed.
2Replacing the battery.
Put the batteries in the case observing the polarities as
illustrated.
3Closing the cover.
Push the cover in the arrow direction until a click is
heard.
Point the remote control transmitter at the remote
control sensor.
Notes on Using Remote Control
Point the remote control at the remote sensor within about
2 meter.
It may not be possible to operate the remote control unit if
the remote control sensor is exposed to direct sunlight.
The remote control is a small, light weight precision
device. To avoid damage, short battery life, operational
errors and poor button response, observe the following.
- Do not apply any shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Remote control sensor
+
+
DO NOT OPERATE ANY FUNCTION THAT TAKES YOURATTENTION AWAY FROM SAFELY DRIVING YOURVEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.

Warning