DVD/Video CD Operation

SOURCE

DVD and video CD operations can be performed from both the remote control unit and the main unit (except for some operations). This section mainly describes operations from the remote control unit. For instructions on operating using the buttons on the main unit, see page 42.

A separately sold monitor is required to view DVDs and video CDs.

Play Position Memory Function:

Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again.

When using the remote control unit

Tips To operate a DVD or video CD, set the selector switch on the rear of the remote control unit to the “AUDIO” side.

Reading this manual

These indicate the discs for which the function can be used.

DVD

Stopping playback (PRE-STOP) Video CD

Press the stop button during playback to stop playback. That position is stored in the memory.

1 Press the button once during playback. “PRE-STOP” is displayed.

DVD ...DVDs

Video CD ...Video CDs

Playing DVD/Video CD

DVD

Video CD

Caution • Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

When using the remote control, be careful to press one button at time. Pressing multiple buttons at the same time may cause erroneous operation.

If you switch the power or Ignition Key OFF or change sources during playback, playback will continue where you left off when you resume playback.

If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen:

1Press the button on the main unit. The movable display will open.

Insert a disc with the label side facing up.

2 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The movable display will close and playback will begin. When a disc is already inserted, press the SOURCE button to switch to the disc mode.

3 To eject the disc, press the button on the main unit.

NOTES

If the disc does not eject, press an hold the button again for more than 3 seconds with the movable display open.

The reverse side of a double-sided DVD will not be played automatically.

Remove the disc, turn it over, and reinsert it.

DO NOT insert discs containing maps for the navigation system. Doing so could result in damage.

“DISC ERROR” appears on the monitor display if a non-compatible disc is loaded, if the disc is loaded upside-down or if the disc is scratched or dirty. Press the button on the main unit to open the display and remove the disc.

Continued

29-EN

Page 31
Image 31
Alpine DVA-7996 owner manual Playing DVD/Video CD, When using the remote control unit, Reading this manual

DVA-7996 specifications

The Alpine DVA-7996 is a remarkable mobile multimedia receiver designed to elevate the in-car entertainment experience. With its robust set of features and advanced technologies, it caters to both audiophiles and casual listeners alike.

One of the standout aspects of the DVA-7996 is its impressive 7-inch touchscreen display. With high resolution and vibrant colors, the screen offers excellent visibility in various lighting conditions. The touchscreen interface is intuitive, making it user-friendly for both drivers and passengers. The customizable user interface allows users to personalize their experience, adjusting backgrounds and icons to suit individual preferences.

The DVA-7996 embraces the latest in connectivity, featuring built-in Bluetooth technology. This enables seamless audio streaming from compatible devices, hands-free calling, and easy access to voice command features. Additionally, it supports a broad range of media formats, including MP3, WMA, AAC, FLAC, and more, ensuring that users can enjoy their favorite tracks in various ways.

In terms of radio capabilities, the DVA-7996 offers AM/FM tuning with a high-quality digital signal processor (DSP) that enhances sound quality and allows for better reception. Users can store their favorite stations easily, thanks to the generous preset capabilities.

Another key highlight of the DVA-7996 is its compatibility with various media sources. It features a front USB port, making it easy to connect flash drives for direct playback, as well as a dedicated auxiliary input for additional devices. For users who enjoy using smartphones, the unit is compatible with Apple CarPlay and Android Auto, which provide a seamless integration of mobile apps right on the receiver's display.

Sound quality is paramount in the DVA-7996, which is evident through its comprehensive equalizer and crossover settings. With multiple channels and customizable options, users can tailor the audio output to suit their preferences, ensuring a finely tuned listening experience.

Safety and convenience features are also a significant part of the DVA-7996 package. It includes a rear-view camera input, which enhances visibility while reversing, and customizable steering wheel control integration, allowing users to operate the unit without taking their hands off the wheel.

Overall, the Alpine DVA-7996 stands out in the competitive automotive audio market, combining style, advanced technology, and exceptional sound quality to provide a superior user experience. Whether you’re a music enthusiast or simply looking for an upgrade to your vehicle's infotainment system, the DVA-7996 is a compelling choice.