Installation and
Connections
Installation
Caution
Do not block the unit’s air vents. This unit requires adequate air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.
Air vents
(Side of the unit) |
|
Accessory List |
|
• XM data receiver | 1 |
• Power cable | 1 |
• Navigation connection cable (5m) | 1 |
• XM tuner cable (3m) | 1 |
• Self tapping screw (M4 ⋅ 14) | 4 |
• Velcro Fasteners | 2 |
•An antenna is required for the proper operation of this receiver. This antenna must be purchased separately. Please follow the installation instructions supplied with the antenna.
Velcro fastener Mounting
When mounting the unit with the Velcro fasteners, be sure to choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners.
1 Remove the protective paper and attach two pieces of velcro fastener to the bottom of the unit.
Velcro Fasteners | Protective paper |
(Included) |
2 Check the position, and then fix the unit to the floor carpet.
Screw-down Mounting
When mounting the tuner with the screws, be sure to choose a flat location.
1 Using the unit as a template, hold it at its mounting location and mark the holes to be drilled. Before drilling, make sure that there are no objects that could be damaged behind the mounting surface.
2 Drill holes and secure the unit with self- tapping screws (M4 x 14) supplied.
