Connections
IGNITION
1
Ignition Key
BATTERY | 2 |
|
GND | 3 |
4
5 | |
| |
XM compatible Navigation |
|
(Sold separately) | 6 |
|
XM Radio Tuner | ! |
| |
(Sold separately) |
| ||
Violet | 9 Black 7 | ||
|
"8
Battery
1Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.
2Battery Lead (Yellow)
Connect this lead to the positive (+) terminal of the vehicle's battery.
3Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
4Fuse Holder (7.5A)
5Power Supply Connector
6Navigation Connection Cable (Included)
7XM Antenna Output Connector (Black)
8XM Antenna Input Connector (Violet)
Connect this to an optional XM antenna.
9XM Tuner Cable (Included)
Connect the black connector of the cable to this receiver and the violet connector to the XM radio tuner.
If required, use an optional splitter.*
!XM Antenna Connector
Depending on the XM tuner connector type, antenna connection may not be possible.
"XM Antenna (Sold Separately)
*“NO SIGNAL” is displayed on the XM tuner if the XM radio tuner cable is not connected when an optional splitter is used.
•After connecting, confirm that "Traffic Receiver: Connected" appears in the System Status display. (Refer to "System Information" in the Owner's Manual of a NVD- A801 series on page 57.)
