General Setting
“General” is selected on the setup main menu in step 2.
Setting the Clock Display (Clock Mode)
24H Type / 12H Type (Initial setting)
You can select the clock display type,
Setting of Calendar Display Pattern Switching (Calendar Type)
M/D/Y (Initial setting) / D/M/Y / Y/M/D
You can switch the calendar display pattern to be shown when the time is displayed.
Y : shows the year
M : shows the month
D : shows the day
ex. M/D/Y 
Dec/31/2009
Setting Daylight Saving Time (Daylight Time)
On / Off (Initial setting)
On: Turn Daylight Saving Time mode ON. The time advances by one hour for areas observing Daylight Saving Time.
Off: Return to the ordinary time.
Connecting an MP3 Changer (Play Mode)
CDDA (Initial setting) / CDDA & MP3
Perform this setting when connecting MP3 changer. MP3 changer can playback CDs containing both CD and MP3 data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD or the MP3 data, playback starts from the CD data portion of the disc.
CDDA : Only CD data can be played back.
CDDA & MP3 : Both CD data and MP3 file tracks can be played back.
•Change discs after performing this setting.
Sound (Beep) Guide Function
Beep On (Initial setting) / Beep Off
This function will give audible feedback with varying tones depending upon the button pressed.
Turning Mute Mode On/Off (Int Mute)
Int Mute On (Initial setting) / Int Mute Off
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.
•When BLUETOOTH is set to Adapter, Int Mute cannot be set. Refer to “Setting the BLUETOOTH Connection (BLUETOOTH IN)” (page 23).
•When the BLUETOOTH INTERFACE is connected, set Int Mute to Off.
Setting Tone Defeat for External Devices (Int Audio)
Int Audio On / Int Audio Off (Initial setting)
When inputting external devices to this unit, turning tone defeat on will bypass Bass Frequency, Treble Frequency, High Pass Filter, i.e., sound for external devices is output at the default setting.
Setting the Changer Name (CHG Name)
CHG (Initial setting) / PMD
When an optional changer is connected, you can set the displayed mode name.
•The setting can be made only when a changer is connected. When two changers are connected, the CHG1 Name/CHG2 Name is displayed, and the setting can be made respectively.
Setting the AUX Mode (V-Link)
AUX IN On / AUX IN Off (Initial setting)
You can input TV/video sound by connecting an optional Versatile Link Terminal
You can change the AUX name display when AUX IN is set to On. When AUX IN is set to On, select the “AUX Name” mode by rotating the Double Action encoder , then press 
/ENTER.
After that, rotate the Double Action encoder to select the desired AUX name, then press 
/ENTER.
If the
•Via 
SOURCE to select AUX mode and then press BAND to select your desired device.
Setting the AUX+ Mode
AUX+ On / AUX+ Off (Initial setting)
You can input the audio of an external device, (such as a Portable audio player) to the BLUETOOTH interface connector of this unit. A special Conversion cable
AUX+ On : Set to On when an external device is connected. If
SOURCE is pressed and Auxiliary+ is selected, the sound of the external device is input to the unit.
AUX+ Off : Set to Off when a BLUETOOTH INTERFACE is connected.
AUX+ Audio Level Adjustment (AUX+ IN GAIN)
High (Initial setting) / Low
Low: Decreases the external input audio level
High: Increases the external input audio level
