
1
2
English
Basic Operation
Adjusting the Volume/
Bass/Treble/Balance/
Fader
12
Press the rotary encoder repeatedly until the mode you wish to adjust is obtained. Each press changes the modes as follows:
→BAS. → TRE. → BAL. → FAD. → VOL.
The volume level can be adjusted at any time by just rotating the rotary encoder.
Rotate the rotary encoder to set to the desired sound within 5 seconds after selecting the mode.
Note: If the rotary encoder is not turned or pressed within 5 seconds after selecting the BAS. (Bass), TRE. (Treble), BAL. (Balance), or FAD. (Fader), the unit automatically defaults back to the VOL. (Volume) mode.
1
Muting the Sound
1 | Press the MUTE button to switch between the |
Mute On and Off modes. |
When the MUTE On mode is selected, the volume level instantly decreases.
30