English
Basic Operation
| 1 | Selecting the Monitor |
| Opening Angle | |
|
| |
|
| The monitor opening angle can be set in 2 |
|
| positions. |
1 |
| Press and hold the OPEN/CLOSE button for at |
| least 2 seconds while the monitor is being |
raised. Each press changes the monitor angle back or forth.
| 1 |
| Adjusting the Monitor |
| Viewing Angle |
| Adjust the monitor's angle for better visibility. |
1 | Press the and (ANGLE) buttons to |
adjust the monitor's angle so the screen will be |
in the best viewing position. Each press of the buttons produces a beep and changes the screen angle between 80 and 104 degrees.
Notes: • If the monitor touches an obstacle while the angle is being adjusted the unit will stop the screen immediately. Should this happen, remove the
obstacle and press the 
or 
button again.
• The screen colour will vary when viewed at certain angles. Adjust the screen angle for the best viewing position.
• If the voltage of the vehicle's battery power is low, the screen may blink when the screen angle is changed. This is normal and not a malfunction.
28
