Alpine IVA-W202R, IVA-W205R owner manual General Setup Operation

GENERAL Setup

General Setup Operation

Setting Daylight Saving Time

Setting item: DAYLIGHT SAVING TIME

Setting contents: OFF / ON

OFF: Return to the ordinary time.

ON: Place the Summer Time mode ON. The time advances by one hour.

The Parking Brake must be engaged to access the GENERAL mode screen. Attempting to access this screen while driving will display the warning-CAN’T OPERATE WHILE DRIVING.

The following steps 1 to 4 are common operations to each “Setting item” of GENERAL Setup. Refer to each section for details.

1 Touch [SETUP] on the main source screen.

The SETUP selection screen is displayed.

2 Touch [GENERAL].

The GENERAL SETUP screen appears.

3 Touch [OFF], [ON] or [ ], [ ], etc., of the desired item to change its setting.

Setting items:

CLOCK / CLOCK ADJUST / DAYLIGHT SAVING TIME / DEMONSTRATION / BEEP / AUTO SCROLL / LANGUAGE SELECT / LED DIMMER LEVEL

4 Touch [RETURN] to return to the previous screen.

Touch and hold [RETURN] for at least 2 seconds to return to the main source screen that was displayed before the setup operation was started.

•Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed.

Displaying the Time

The clock indication on the monitor display is turned on or off respectively.

Setting item: CLOCK

Setting contents: OFF / ON

Setting the Time

Setting item: CLOCK ADJUST

Further setting items : HOUR / MINUTE / TIME ADJUST

Setting contents: 0-23 / 0-59 / RESET

HOUR: Adjust the hour.

MINUTE: Adjust the minute.

RESET: If the clock shows less than 30 minutes past, the minute will be “: 0”; more than 30, the hour advances.

•The clock-adjusting mode is cancelled when the power is turned off, when [RETURN] or [CONTROL] is touched.

•Clock adjustment can be made when “RDS Time Display” (page 33) is set to OFF.

Demonstration Function

This unit is equipped with a demonstration function capable of showing basic operations of respective sources on the monitor display.

Setting item: DEMONSTRATION

Setting contents: OFF / ON

OFF: Turns off the demonstration mode.

ON: Turns on the demonstration mode to show the basic operations.

•The demonstration operation is automatically repeated until the function is turned off.

Sound (Beep) Guide Function

Setting item: BEEP

Setting contents: OFF / ON

OFF: Deactivate the Sound Guide mode. The sound guide beep will not be produced when a button on the unit is pressed.

ON: Activate the Sound Guide mode.

Setting the Scroll

Scroll display is available if CD text, folder name, file name or tag information is entered.

Setting item: AUTO SCROLL

Setting contents: OFF / ON

OFF: Turns off the AUTO scroll mode.

Scroll display is done once as a track is changed. ON: Turns on the AUTO scroll mode. Scroll display is

repeated as long as the mode is turned on.

•The display scrolls on the unit when the screen is filled up.

•Song, artist and album name, etc. scrolls when an iPod is connected.

Switching to the Russian Font

Two types of font can be selected.

Setting item: LANGUAGE SELECT

Setting contents: MODE1 / MODE2

MODE1: Normal Font Display (ISO8859-1).

MODE2: Russian Font Display (WINDOWS-1251)

You cannot use this font for display in RDS, Tuner mode.

34-EN