Installation and Connections

Before installing or connecting the unit, please read the following and pages 4 to 6 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your IVA-W205R/IVA-W202R. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the IVA-W205R/IVA-W202R to the fuse box, make sure the fuse for the intended circuit of the IVA-W205R/IVA-W202R has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The IVA-W205R/IVA-W202R uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

•The Display must be completely retracted in the casing when installing. If it is not, problems may occur.

•When installing in automobiles, make sure the Display can open/ close without coming in contact with the shift lever.

IMPORTANT

SERIAL NUMBER:

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

below and keep it as a permanent record. The serial number plate is

INSTALLATION TECHNICIAN:

located on the bottom of the unit.

PLACE OF PURCHASE:

64-EN

Page 64 Page 66
Page 65
Image 65
Alpine IVA-W202R, IVA-W205R owner manual Installation and Connections, 64-EN
Page 64 Page 66

IVA-W202R, IVA-W205R specifications

The Alpine IVA-W205R and IVA-W202R are sophisticated in-dash multimedia receivers designed to enhance your in-car entertainment experience. These models stand out in the automotive audio realm, offering a comprehensive suite of features and technologies that cater to modern connectivity needs.

The IVA-W205R boasts a 7-inch motorized touchscreen display, providing an intuitive interface for users to navigate through various multimedia options effortlessly. Its vibrant screen not only enhances aesthetic appeal but also ensures that drivers can easily access functions without distraction. The IVA-W202R features similar screen dimensions and usability, ensuring a seamless experience across both models.

One of the standout features of the IVA-W205R is its support for various media formats. Users can enjoy playback from CDs, DVDs, and an extensive range of audio and video file formats, accommodating diverse preferences. Additionally, both receivers support USB connectivity, allowing for the easy connection of external devices, whether for music streaming or charging purposes.

Bluetooth technology is another significant advantage found in both models. This feature enables hands-free calling and wireless audio streaming from smartphones, ensuring safe driving while staying connected. The built-in microphone further amplifies the convenience of these functions, providing clarity during calls.

For those who appreciate precise audio control, the IVA-W205R and IVA-W202R are equipped with advanced sound tuning options. Users can adjust equalizer settings, crossover frequencies, and time alignment to create a tailored listening environment that complements their vehicle’s acoustics. This level of customization helps in delivering an exceptional audio performance that meets the expectations of audio enthusiasts.

Both receivers are also compatible with satellite radio, allowing users to access a wide range of channels and genres. The integration of navigation capabilities, particularly in the IVA-W205R, enhances travel experiences, offering turn-by-turn directions and ensuring that users can explore confidently without the hassle of paper maps.

In summary, the Alpine IVA-W205R and IVA-W202R are outstanding multimedia receivers that elegantly combine advanced technologies with user-friendly features. With their rich display, extensive media compatibility, Bluetooth connectivity, and customizable audio settings, these models prove to be an excellent choice for anyone looking to elevate their driving experience with high-quality entertainment options.
Top Page Image Contents