Hands-Free Phone
Control
About the Hands-Free Phone
•Avoid performing a
•Shut the windows while calling.
•If both persons use a
•Certain voices may sound unnatural, depending on the person using the telephone, or on telephone line condi- tions.
•Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider’s network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality.
All features, functionality, and other product specifications, as well as the information contained in the Owner’s Manual are based upon the latest available information and are believed to be accurate at the time of printing. Alpine reserves the right to change or modify any information or specifications without notice or obligation.
[ The explanations in this Owner’s Manual mainly describe the following operations from the AV head unit.
Answering a Call
Incoming calls are announced by the received call ring tone and a displayed message (PHONE No.).
Touch [
].
The call starts.
•Indicator 
(Signal Strength):
The indicator is displayed when the Bluetooth Audio source or Tel. mode on the AV head unit is active..
CD Head Unit / Digital Media Receiver:
Press [PHONE].
•When “Setting the Received Calls automatically” (page 5) is set to ON, you can receive a call automatically.
•While calling, the source sound on the unit is muted.
Hanging up the Telephone
Touch [
].
The call finishes.
CD Head Unit / Digital Media Receiver:
Press [PHONE].
Adjusting the volume when receiving a Call
While calling, you can adjust the volume. The adjusted volume level is stored.
Press [3] / [4] or turn the Rotary encoder to adjust the volume.
CD Head Unit / Digital Media Receiver:
Turn the Rotary encoder or the Center jog dial to
adjust the volume.
•You may need to increase volume from your regular audio listening source level. However, increasing the volume excessively may result in feedback. If feedback is noticed as feedback is directly related to the volume, turn down the volume as low as acceptable to eliminate it. Positioning the microphone in a direction away from the main car speakers (e.g. clipped on sunvisor) may also reduce feedback at high volume.
