Alpine TDM-7582R, TDM-7584R, TDM-7586RB CD Changer Operation

13-EN
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer (M-Bus)
is connected to the 8-pin DIN connector of the
TDM-7586RB/TDM-7584R/TDM-7582R you can
control the CD Changer using the TDM-7586RB/
TDM-7584R/TDM-7582R.
NOTE
The CD controls on the TDM-7586RB/TDM-7584R/TDM-
7582R for the CD operation are functional only when the
CD Changer is interconnected with the TDM-7586RB/
TDM-7584R/TDM-7582R.
1Press the SOURCE button to activate the CD
Changer.
The display shows the disc number and track
number.
2Make sure that the Function indicator illuminates,
then press the Preset buttons to select the
desired disc loaded in the CD Changer.
3To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
NOTES
•If the "F" indicator is illuminated the Disc Select
buttons become nonfunctional.
•Press the SOURCE button to activate the CHANGER
mode.
CD Changer Operation
DN g
f UP
SOURCE
-/JPreset buttons
Music Sensor (M.S.) Skip
1Press the DN g button once to return to the
beginning of the current track.
If you wish to return to the beginning of a track
further back, repeatedly press until you reach the
desired track.
Press the f UP button once to advance to the
beginning of the next track.
If you wish to advance to a track further ahead,
press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1Press and hold the DN g or f UP button to
quickly move backward or forward respectively
until you reach the desired portion.
NOTE
This feature works only in the CD playback mode.