Alpine TDM-7582R, TDM-7584R, TDM-7586RB Radio Operation

6-EN

3Press the TUNE button to illuminate the "DX"

and "SEEK" indicators in the display.

With the DX mode activated, both strong and

weak stations will be tuned in the Auto-Seek

operation.

Press again to return to the local mode. The "DX"

indicator will turn off and the "SEEK" indicator

will remain illuminated. Now, only strong stations

will be tuned.

4Press the DN g or f UP button to

automatically seek a station downward or

upward respectively.

When the unit finds a station, the unit stops at

that station.

Press the same button again to seek the next

station.

Manual Storing of Station Presets

1Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

2Make sure that the function indicator at the top

side of the "F" button illuminates, then press and

hold the preset buttons (1 through 6) that you

want to store the station on for at least 2

seconds. The selected station is stored.

The display shows the band, preset No. with a

triangle (9) and station frequency memorized.

Radio Operation

TUNE / A.ME

SOURCE

DN g

f UP

BAND

Manual Tuning

1Press the SOURCE button until radio frequency

appears in the display.

2Press the BAND button repeatedly until the

desired radio band is displayed.

Each press changes the radio bands as follows:

→ F1 → F2 → MW → LW

3Press the TUNE button repeatedly until "DX

SEEK" and "SEEK" disappears from the display.

NOTE

The initial mode is DX-SEEK.

4Press the DN g or f UP button to move

downward or upward one step respectively until

the desired station frequency is displayed.

NOTE

The ST indicator appears on the display when a Stereo

FM station is tuned in. If the stereo FM signal becomes

weak, the ST indicator disappears from the display and

the unit automatically switches the mode from stereo to

monaural to reduce the noise. When the signal becomes

strong enough, the unit automatically switches back to

the stereo mode.

Automatic Seek Tuning