15-EN
To Display CD Titles
(TDM-7586RB/TDM-7584R only)
Titles can be displayed for the CDs with titles
entered.
(Refer to page 15 to title discs.)
1Press the TITLE button in the CD mode.
The display will be switched each time the switch
is pressed.
Titling Discs (TDM-7586RB/
TDM-7584R only)
1Press the TITLE button to select the disc title
display mode. (Refer to page 15.)
2Make sure that the function indicator at the top
side of the "F" button illuminates, then press the
Preset buttons to select the desired disc to be
titled.
3Press and hold the TITLE button for at least 3
seconds.
The first digit blinks.
4Press the DN g or f UP button repeatedly
to select the desired letter/numeral/symbol
available for naming.
5Press the TITLE button to store the first
character.
The first character will stop blinking and the
display will automatically advance to the next
digit. When that digit begins to blink, you may
choose the next letter or symbol of your title.
6Repeat the steps 4 and 5 above to complete the
titling. Entering the eighth character,
automatically stores the title into memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 7 to complete the title.
7Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
•When the memory capacity for the disc titles is used
up, the display shows "FULL DATA" to indicate that
no more title can be memorized.
•When you want to erase a title, enter the " " symbol
into all spaces.
Erasing Disc Title (TDM-7586RB/
TDM-7584R only)
1Press the TITLE button to select the disc titling
mode. Then press and hold it for at least 3
seconds.
2Press and hold the SOURCE button for at least
3 seconds to activate the title erasing mode.
The disc title in the display will blink.
3Press the DN g or f UP button repeatedly
until the disc title you want to erase is displayed.
4Press and hold the SOURCE button for at least
3 seconds to erase the disc title displayed.
5Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.